TP-Link WR841N v.9 UART First Boot-Up log. Captured by: KonukoII dm_major = 253 spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 Read MAC from flash( 7df100) 7c-ffffff8b-ffffffca-48-60-ffffffba GMAC1_MAC_ADRH -- : 0x00007c8b GMAC1_MAC_ADRL -- : 0xca4860ba Ralink APSoC Ethernet Driver Initilization. v3.1 256 rx/tx descriptors allocated, mtu = 1500! NAPI enable, Tx Ring = 256, Rx Ring = 256 spifd from 0x007df100 length 0x6, ret 0, retlen 0x6 Read MAC from flash( 7df100) 7c-ffffff8b-ffffffca-48-60-ffffffba GMAC1_MAC_ADRH -- : 0x00007c8b GMAC1_MAC_ADRL -- : 0xca4860ba PROC INIT OK! add domain:tplinkwifi.net add domain:tplinkap.net add domain:tplinkrepeater.net add domain:tplinklogin.net tp_domain init ok L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 Set: phy[0].reg[0] = 3900 Set: phy[1].reg[0] = 3900 Set: phy[2].reg[0] = 3900 Set: phy[3].reg[0] = 3900 Set: phy[4].reg[0] = 3900 Set: phy[0].reg[0] = 3300 Set: phy[1].reg[0] = 3300 Set: phy[2].reg[0] = 3300 Set: phy[3].reg[0] = 3300 Set: phy[4].reg[0] = 3300 resetMiiPortV over. starting pid 66, tty '/dev/ttyS1': '/bin/sh' ~ # [ util_execSystem ] 139: ipt_init cmd is "/var/tmp/dconf/rc.router" [ dm_readFile ] 2061: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml spiflash_ioctl_read, Read from 0x007c0000 length 0x10000, ret 0, retlen 0x10000 spiflash_ioctl_read, Read from 0x007c0000 length 0x10, ret 0, retlen 0x10 [ dm_loadCfg ] 2347: software version is not match, in config, version = 0 [ dm_readFile ] 2061: can not open xml file /var/tmp/pc/default_config.xml!, about to open file /etc/default_config.xml [ parseConfigNode ] 525: Meet unrecognized object node "PhDDNSCfg", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "PhDDNSCfg", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "ACL", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "ACL", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "MACAddressControlEnabled", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "X_TP_MACAddressControlRule", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "Vlan", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "MACAddressControlEnabled", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "X_TP_MACAddressControlRule", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "Vlan", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "MACAddressControlEnabled", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "X_TP_MACAddressControlRule", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "Vlan", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_QuickSave", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_QuickSave", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_WANUSB3gLinkConfig", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "QueueManagement", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_IPTV", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "VoiceService", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "VoiceService", skip the node [ parseConfigNode ]spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 525: Meet unrespiflash_ioctl_read, Read from 0x007df200 length 0x4, ret 0, retlen 0x4 cognized object spiflash_ioctl_read, Read from 0x007df300 length 0x4, ret 0, retlen 0x4 node "StorageSerspiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10 vice", skip the spiflash_ioctl_read, Read from 0x007df500 length 0x29, ret 0, retlen 0x29 node [ parseConspiflash_ioctl_read, Read from 0x007df600 length 0x21, ret 0, retlen 0x21 figNode ] 525: spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10 Meet _ioctl_read, Read from 0x00020000 length 0x1d0, ret 0, retlen 0x1d0 d object node "Xspiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6 _TP_SpeedDialCfg", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_MultiIspDialPlan", skip the node [ parseConfigNode ] 525: Meet unrecognized object node "X_TP_CallLogCfg", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node [ parseConfigNode ] 530: Meet unrecognized parameter node "WEPKeyIndex", skip the node ===>Enter Router mode sendto: No such file or directory pid 65 send 2001 error [ util_execSystem ] 139: oal_startDynDns cmd is "dyndns /var/tmp/dconf/dyndns.conf" [ oal_sys_getOldTZInfo ] 519: Open TZ file error! [ util_execSystem ] 139: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ" [ util_execSystem ] 139: oal_startNoipDns cmd is "noipdns /var/tmp/dconf/noipdns.conf" [ util_execSystem ] 139: oal_startCmxDns cmd is "cmxdns /var/tmp/dconf/cmxdns.conf" ioctl: No such device [ util_execSystem ] 139: oal_br_addBridge cmd is "brctl addbr br0;brctl setfd br0 0;brctl stp br0 off" [ util_execSystem ] 139: oal_ipt_addLanRules cmd is "iptables -t filter -A INPUT -i br+ -j ACCEPT " [ util_execSystem ] 139: oal_intf_setIntf cmd is "ifconfig br0 192.168.0.1 netmask 255.255.255.0 up" [ util_execSystem ] 139: oal_util_setProcLanAddr cmd is "echo "br0 16820416," > /proc/net/conRaeth v3.1 (ntract_LocalAddrNAPI " [ util_exec,SkbRecycleSystem ] 139: o) al_intf_enableIn phy_tx_ring = 0x030aa000, tx_ring = 0xa30aa000 tf cmd is "ifcon phy_rx_ring0 = 0x030ab000, rx_ring0 = 0xa30ab000 fig eth0 up" [fe_sw_init:5185]rt305x_esw_init. disable switch phyport... GMAC1_MAC_ADRH -- : 0x00007c8b GMAC1_MAC_ADRL -- : 0xca4860ba RT305x_ESW: Link Status Changed [ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 1 : [3] [ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 2 : [4] [ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 3 : [5] [ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 4 : [6] [ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 3" [ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.3 up" set if eth0.3 to *not wan dev [ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 4" [ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.4 up" set if eth0.4 to *not wan dev [ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 5" [ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.5 up" set if eth0.5 to *not wan dev [ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 6" [ util_execSystem ] 139: oal_intf_edevice eth0.3 entered promiscuous mode nableIntf cmd isdevice eth0 entered promiscuous mode "ifconfig eth0.br0: port 1(eth0.3) entering forwarding state 6 up" set if br0: port 1(eth0.3) entering forwarding state eth0.6 to *not wan dev [ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vcodevice eth0.4 entered promiscuous mode nfig add eth0 2"br0: port 2(eth0.4) entering forwarding state [ util_execSbr0: port 2(eth0.4) entering forwarding state ystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.2 up" set if eth0.2 tdevice eth0.5 entere o wan dev [ vlabr0: port 3(eth0.5) entering forwarding state n_addLanPortsIntbr0: port 3(eth0.5) entering forwarding state oBridge ] 574: add lan Port 255 from br0 [ util_execSystem ] 139: oal_br_addIdevice eth0.6 entered promiscuous mode ntfIntoBridge cmbr0: port 4(eth0.6) entering forwarding state d is "brctl addibr0: port 4(eth0.6) entering forwarding state f br0 eth0.3" [ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctl addif br0 eth0.4" [ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctl addif br0 eth0.5" [ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctl addif br0 e [ util_execSystem ] 139: rsl_initIPv6CfgObj cmd is "echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6" [ util_execSystem ] 139: oal_eth_setIGMPSnoopParam cmd is "for i in /sys/devices/virtual/net/*/bridge/multicast_snooping;do echo 1 > $i ; done" [ util_execSystem ] 139: oal_wlan_ra_setCountryRegion cmd is "cp /etc/SingleSKU_FCC.dat /var/Wireless/RT2860AP/SingleSKU.dat" [ util_execSystem ] 139: oal_wlan_ra_setCountryRegion cmd is "iwpriv ra0 set CountryRegion=0" ra0 no private ioctls. [ util_execSystem ] 166: execute ok, exit status = 255 [ util_execSystem ] 139: oal_wlan_ra_loadDriver cmd is "insmod /lib/modules/kmdir/kernel/drivers/net/wireless/mt_wifi_ap/mt_wifi.ko" ADDRCONF(NETDEV_CHANGE): eth0.4: link becomes ready ADDRCONF(NETDEV_CHANGE): eth0.5: link becomes ready ADDRCONF(NETDEV_CHANGE): eth0.6: link becomes ready ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready === pAd = c082d000, size = 1493064 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 RtmpChipOpsHook(492): Not support for HIF_MT yet! mt7628_init()--> mt7628_init(FW(8a00), HW(8a01), CHIPID(7628)) e2.bin mt7628_init(1156)::(2), pChipCap->fw_len(64560) mt_bcn_buf_init(218): Not support for HIF_MT yet! <-- [ util_execSystem ] 139: oal_wlan_ra_initWlan cmd is "ifconfig ra0 up" TX_BCN DESC a3282000 size = 320 RX[0] DESC a3284000 size = 2048 RX[1] DESC a3285000 size = 2048 RT_CfgSetApcliMacAddress : invalid mac setting cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 default ApCliAPSDCapable[0]=0 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) WscKeyASCII=8 WscKeyASCII=8 [RTMPReadParametersHook:297]wifi read profile faild. load fw image from fw_header_image AndesMTLoadFwMethod1(2263)::pChipCap->fw_len(64560) FW Version:1 FW Build Date:20161213152835 CmdAddressLenReq:(ret = 0) CmdFwStartReq: override = 1, address = 1048576 CmdStartDLRsp: WiFI FW Download Success MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000012 RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4 RtmpEepromGetDefault::e2p_dafault=2 RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2 NVM is FLASH mode 1. Phy Mode = 14 exec! spiflash_ioctl_read, Read from 0x007f0000 length 0x400, ret 0, retlen 0x400 eeFlashId = 0x7628! Country Region from e2p = ffff tssi_1_target_pwr_g_band = 36 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(11): Not support for HIF_MT yet! NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> MtAsicInitMac()--> mt7628_init_mac_cr()--> MtAsicSetMacMaxLen(1277): Set the Max RxPktLen=450! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 AntCfgInit(2946): Not support for HIF_MT yet! MCS Set = ff ff 00 00 01 MtAsicSetChBusyStat(861): Not support for HIF_MT yet! FW LOG: !!!! Pass, dont need recal (total fail[0]) FW LOG: !!!! Pass, dont need recal (total fail[0]) FW LOG: !!!! Pass, dont need recal (total fail[0]) FW LOG: RxDCOC Set DC Valid(8)(2) CmdSlotTimeSet:(ret = 0) [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0 MtAsicSetRalinkBurstMode(3048): Not support for HIF_MT yet! MtAsicSetPiggyBack(796): Not support for HIF_MT yet! reload DPD from flash , 0x9F = [ca00] doReload bit7[0] CmdLoadDPDDataFromFlash: Channel = 10, DoReload = 0 MtAsicSetTxPreamble(3027): Not support for HIF_MT yet! MtAsicAddSharedKeyEntry(1344): Not support for HIF_MT yet! The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4 MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 ap_ftkd> Initialize FT KDP Module... Main bssid = 7c:8b:ca:48:60:ba <==== rt28xx_init, Status=0 @@@ ed_monitor_exit : ===> @@@ ed_monitor_exit : <=== mt7628_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f, EDCCA_Status=0 WiFi Startup Cost (ra0): 3.056s [ util_execSystem ] 139: oal_wlan_ra_initWlan cmd is "echo 1 > /proc/tplink/led_wlan_24G" [ util_execSystem ] 139: oal_wlan_ra_setStaNum cmd is "iwpriv ra0 set MaxStaNum=32" [ util_execSystem ] 139: oal_br_addIntfIndevice ra0 entered promiscuous mode toBridge cmd is br0: port 5(ra0) entering forwarding state "brctl addif br0br0: port 5(ra0) entering forwarding state ra0" [ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctldevice apcli0 entered promiscuous mode addif br0 apcli0" [ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctl addif br0 apcli0" brctl: bridge br0: Device or resource busy [ util_edevice ra1 entered promiscuous mode xecSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: oal_bspiflash_ioctl_read, Read from 0x007f0000 length 0x2, ret 0, retlen 0x2 r_addIntfIntoBridge cmd is "brctl addif br0 ra1" [ util_execSystem ] 139: oal_wlan_ra_initEnd cmd is "wlNetlinkTool &" [ util_execSystem ] 139: oal_wlan_ra_initEnd cmd is "killall -q wscd" [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: oal_wlan_ra_initEnd cmd is "wscd -i ra0 -m 1 -w /var/tmp/wsc_upnp/ &" [ util_execSystem ] 139: rsl_initLanWlanObj cmd is "echo 0 > /proc/tplink/wl_mode" WLAN-Start wlNetlinkTool Waiting for Wireless Events from interfaces... swWlanChkAhbErr: netlink to do [ oal_wlan_ra_loadDriver ] 2032: no 5G chip. [ rsl_initLanWlanObj ] 9093: perror:1 wscd: SSDP UDP PORT = 1900 sendto: No such file or directory pid 65 send 2030 error sendto: No such file or directory pid 65 send 2004 error [ util_execSystem ] 139: oal_startDhcps cmd is "dhcpd /var/tmp/dconf/udhcpd.conf" [ util_execSystem ] 139: oal_lan6_startDhcp6s cmd is "dhcp6s -c /var/tmp/dconf/dhcp6s_br0.conf -P /var/run/dhcp6s_br0.pid br0 &" [ util_execSystem ] 139: oal_lan6_startRadvd cmd is "radvd -C /var/tmp/dconf/radvd_br0.conf -p /var/run/radvd_br0.pid &" [ util_execSystem ] 139: oal_startSnmp cmd is "snmpd -f /var/tmp/dconf/snmpd.conf" mldProxy# file: src/mld_ifinfo.c;line: 102; error = No such file or directory mldProxy# Err: get LLA failed iptables: Bad rule (does a matching rule exist in that chain?). radvd starting [Jan 01 00:00:07] radvd: no linklocal address configured for br0 [Jan 01 00:00:07] radvd: error parsing or activating the config file: /var/tmp/dconf/radvd_br0.conf [ util_execSystem ] 139: oal_br_delIntfFromBridge cmd is "brctl delif br0 eth0.2" brctl: bridge br0: Invalid argument [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: oal_intf_setIfMac cmd is "ifconfig eth0.2 down" [ util_execSystem ] 139: oal_intf_setIfMac cmd is "ifconfig eth0.2 hw ether 7C:8B:CA:48:60:BB up" [ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.2 up" [ rsl_initAppObj ] 743: ==> start dhcp client [ util_execSystem ] 139: oal_ipt_fwDdos cmd is "iptables -D FORWARD -j FIREWALL_DDOS " iptables: No chain/target/match by that name. [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: oal_ipt_forbidLanPing cmd is "iptables -t filter -D INPUT -i br+ -p icmp --icmp-type echo-request -j DROP iptables -t filter -D FORWARD -i br+ -p icmp --icmp-type echo-request -j DROP " iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). [ util_execSyok, exit status = 1 [ util_execSystem ] 139: oal_ddos_delPingRule cmd is "iptables -t filter -D INPUT ! -i br+ -p icmp --icmp-type echo-request -j ACCEPT " iptables: Bad rule (does a matching rule exist in that chain?). [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: oal_ipt_setDDoSRules cmd is "iptables -F FIREWALL_DDOS" [ util_execSystem ] 139: ddos_clearAll cmd is "rm -f /var/tmp/dosHost" [ util_execSystem ] 139: oal_initFirewallObj cmd is "ebtables -N FIREWALL" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -F" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -X" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -P INPUT ACCEPT" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -P FORWARD DROP" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -P OUTPUT ACCEPT" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -N FIREWALL" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -N FWRULE" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -N SETMSS" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i lo -p ALL -j ACCEPT -m comment --comment "loop back"" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i br+ -p tcp --dport 23 -j ACCEPT" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -p tcp --dport 23 -j DROP" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i br+ -p icmpv6 --icmpv6-type echo-request -j ACCEPT" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -p icmpv6 --icmpv6-type echo-request -j DROP" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -i br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -o br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -j FIREWALL" [ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -I FORWARD 1 -j SETMSS" [ util_execSystem ] 139: oal_fw6_setFwEnabeld cmd is "ip6tables -D FIREWALL -j ACCEPT" ip6tables: Bad rule (does a matching rule exist in that chain?). [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: oal_fw6_setFwEnabeld cmd is "ip6tables -F FIREWALL" [ util_execSystem ] 139: oal_fw6_setFwEnabeld cmd is "ip6tables -A FIREWALL -j ACCEPT" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdfilter/nf_conntrack_ftp.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_ftp.ko" [ util_execSystem ] 139: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 500 -j DROP" iptables: Bad rule (does a matching rule exist in that chain?). [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_pptp.ko" [ util_execSystem ] 139: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p tcp --dport 1723 -j DROP" iptables: Bad rule (does a matching rule exist in that chain?). [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 1701 -j DROP" iptables: Bad rule (does a matching rule exist in that chain?). [ util_execSystem ] 166: execute ok, exit status = 1 [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_tftp.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_tftp.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_h323.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_h323.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_sip.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_sip.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_rtsp.ko" [ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_rtsp.ko" nf_nat_rtsp v0.6.21 loading enable switch phyport... Set: phy[0].reg[0] = 3900 Set: phy[1].reg[0] = 3900 [cmd_dutInit():878] init shm [tddp_taskEntry():151] tddp task start Set: phy[2].reg[0] = 3900 Set: phy[3].reg[0] = 3900 Set: phy[4].reg[0] = 3900 Set: phy[0].reg[0] = 3300 Set: phy[1].reg[0] = 3300 Set: phy[2].reg[0] = 3300 Set: phy[3].reg[0] = 3300 Set: phy[4].reg[0] = 3300 resetMiiPortV over. [ util_execSystem ] 139: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ" [ util_execSystem ] 139: prepareDropbear cmd is "dropbearkey -t rsa -f /var/tmp/dropbear/dropbear_rsa_host_key" Will output 1024 bit rsa secret key to '/var/tmp/dropbear/dropbear_rsa_host_key' Generating key, this may take a while... [ util_execSystem ] 139: prepareDropbear cmd is "dropbearkey -t dss -f /var/tmp/dropbear/dropbear_dss_host_key" Will output 1024 bit dss secret key to '/var/tmp/dropbear/dropbear_dss_host_key' Generating key, this may take a while... [ util_execSystem ] 139: prepareDropbear cmd is "dropbear -p 22 -r /var/tmp/dropbear/dropbear_rsa_host_key -d /var/tmp/dropbear/dropbear_dss_host_key -A /var/tmp/dropbear/dropbearpwd" [ util_execSystem ] 139: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ" [ util_execSystem ] 139: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ" l lib l web e help